How to Install Rough Electricity in New Construction
Ask This Old House master electrician Scott Caron helps a homeowner wire her new basement that she’s in the process of turning into finished space.
Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscri....ption_center?add_use
Time: 6 hours
Cost: $100 and up
Skill Level: Moderate
Tools List for Installing Rough Electricity:
New work electrical boxes
14/2 non-metallic cable
1. Running new electrical work usually requires a building permit. Consult with your local building department for more information.
2. Electrical boxes should be mounted 18” to center off the floor for outlets. Secure the nails in the boxes directly to the studs.
3. Code requires that from any point on the wall, an outlet should be within 6 feet. This is the minimum requirement.
4. Drill a hole in the center of every stud for running wire.
5. Unroll the 14 gauge cable to flatten it, then feed it through the holes in the studs. Run enough wire to reach each box and have some extra slack for working.
6. Attach the cable within 6” of the box using a cable staple.
7. Strip 8” of sheathing off the wire and feed it into the box.
8. In boxes with multiple conductors, splice the bare ground wires together and cap with a green wire nut, leaving one bare wire exposed.
9. Mount an electrical box at 48” to center from the floor for a light switch.
10. Run a wire from the outlet, through the switch box, to the first light fixture. From there, connect the other fixtures with wire.
11. Attach the wires for the lights to ceiling joists with a cable staple.
12. Connect the wires to the light fixtures.
13. Secure the light fixtures in place.
14. Tie the feed wire from the closest outlet to the circuit panel. Ensure power is off at the main shut off. Many new rooms require the use of an arc fault circuit breaker.
15. Tape over the new breaker to ensure the circuit isn’t turned on accidentally before final electrical is in place.
16. Have a local inspector sign off on the electrical work before covering in drywall.
All material including used for this project including outlet boxes, non-metallic wire, staples, AFCI (Arc Fault Circuit Interrupter) breaker, recessed fixture housing and switch can be found at the local home center or the local electrical supply center.
Expert assistance with this project was provided by Caron Electric (http://www.caronelectric.com/).
Ask This Old House TV
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
This Old House releases new segments every Sunday, Monday, Wednesday and Friday.
Keywords: This Old House, How-to, home improvement, DIY, ask this old house, scott caron, electrical, new construction
Follow This Old House and Ask This Old House: